grapples

​westendorf mechanical brush crusher grapples

​no AUXILIARY hydraulics required
​
john deere mount $2,200
painted green - model 4200 - weighs 237 lbs / 53"

john deere mount with center teeth sections (top and bottom) $2,600
painted green - model 4215 - weighs 339 lbs / 53"

​universal skid steer mount $2,600
painted yellow or dark gray - model 4300 - weighs 333 lbs / 51"

other mounting options also available

  • No additional hydraulics required. The teeth open and close using the hydraulic dump / curl action of your loader's bucket cylinders.
  • Get rid of the bucket and lift more by eliminating bucket weight and moving the load closer to the tractor.
  • Reach into and easily penetrate to the center of the load for a good grip.
  • Teeth with serrated edges make grabbing into the gnarliest load a snap.
  • Constructed from high strength steel.
  • Unobstructed visibility so you can see what you are grabbing.
  • The implement is gentle and precise allowing you to grab objects firmly without crushing them in the
  • Adjustable lower stop and/or hinge to set lower tooth angle for your loader and application
  • Not compatible with self leveling loaders unless you have the option to disable the self leveling feature. This is because as you lift the loader boom the self leveling feature will open the grapple and you will have to constantly readjust to compensate.


worksaver ELECTRIC compact GRAPPLES

​NO AUXILIARY HYDRAULICS REQUIRED
​
JOHN DEERE MOUNT $3,000
PAINTED GREEN - MODEL ESCG-48JD - WEIGHS 240 LBS

​UNIVERSAL SKID STEER MOUNT $3,000
PAINTED black - MODEL ESCG-48S - WEIGHS 247 LBS

  • 12-volt linear actuator with 8-inch stroke operates the grapple clamp with up to 1,000 lbs or force
  • Includes wiring harness for direct connection to the tractors’ battery
  • Pre-wired rocker switch controls the grapples’ linear actuator and clamps to the loader control joystick for single hand operation of the loader and grapple
  • Designed for sub-compact & compact tractors up to 32 horsepower
  • Overall Width 49"
  • Overall Height Closed 41.5"
  • Grapple Opening 31"
  • Upper Grapple Width 28.25"
  • Lower Grapple Width 49"
  • Tine Spacing 9.25"
  • Number of Tine/Grapple 6-lower 3-upper)
  • Type of Linear Actuator 12-volt, IP65 Rated12-volt, IP65 Rated
  • Actuator Stroke 8"

this grapple is also AVAILABLE with hydraulic operation for $2,300 



​beco COMPACT GRAPPLE 54" - $1,700


  • Light weight for compact and sub-compact tractors
  • Weighs only 310 lbs
  • 25" overall height when closed
  • 9 lower tines on 6-3/4" center to center spacing
  • 3 tine 32" upper grapple
  • Points are fabricated from 3/8" thick steel
  • Opens up to 22"
  • 6' hoses' and pioneer style male couplers included
  • 54" wide x 30" deep x 25" tall (closed) overall

​

​h.l.a. Root rake grapple

​​54" - $2,400
66" - $2,700

above prices for universal skid steer or John Deere style quick attach, many other mount styles available for additional cost
  • Light weight and rugged design for compact loaders
  • 54" weighs 410 lbs.
  • 66" weighs 470 lbs.
  • 28" overall height when closed
  • 7-⅜" center to center tine spacing
  • Points are ½" thick, commercial steel
  • Opens up to 33.5"
  • Hoses' and couplers not included in price



​grapples available in multiple configurations, just ask for a quote

  • Stone forks with grapples
  • Pallet forks with grapples
  • Material buckets with grapples
  • Log grapples
  • Root rakes with grapples
  • Brush grapples
  • available to fit almost any loader quick attach or pin on




hydraulic diverter kits

​available for many late model compact tractors:

-john deere

-kubota

-mahindra

​-massey ferguson

$1,300

    ​QUESTIONS? JUST ASK HERE FOR A QUICK RESPONSE (OFTEN IMMEDIATE)