Baumalight 1P24 PTO stump grinder for compact tractors

SKU: 1P24
CA$4,150.00
CA$4,150.00
Unavailable
per item

This item is not currently in our stock, once your order is placed it will be available within 1-2 weeks.


The Baumalight 1P24 stump grinder was designed compact tractors with hydrostatic transmissions and 20-40 PTO HP. (idealty 30-40 PTO HP, for smaller tractors we recommend the 1P14 model) No hydraulics are required. Cut depth is controlled by the 3 point hitch height and feed rate is controlled by transmission travel speed. Simple, reliable and made in Canada


Please note: Before using the 1P24 Stump Grinder, you must first measure your tractor to see if you require the D005735 Extension Kit. See below for further details.

If dimension "A" (from the PTO shaft lock groove to the center of the lower link arm pin holes) is less than 20" you will require the D005735 extension kit show bellow.
If a quick hith is to be used include it in the measurement and measure to the center of the lower hooks.
1P24 Specifications:
  • Designed for  sub-compact & compact 20-40 PTO HP tractors with hydrostatic transmissions (idealty 30-40 PTO HP, for smaller tractors we recommend the 1P14 model) 
  • 3 point hitch mounted, Cat. 1
  • quick hitch compatible
  • PTO shaft with slip clutch included
  • 34 carbide cutting teeth
  • teeth can be rotated in holders for 3 fresh sharp edges
  • 24" x 3/4" thick grinding wheel
  • will grind approximately 10" above grade - 6" below grade (dependant on tractors 3 point hitch range)
  • dual greaseable main bearings
  • weighs 450 lbs
  • no hydraulics required, cut depth is controlled with 3 point hitch height, feed rate controlled by transmission travel speed.
  • self-regulating feed function that uses the weight of the grinder head, when you advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.
  • 1 year warranty
  • made in Canada (Wallenstein, Ontario)